• admin@mhlabels.com
  • +607-863 0369

Standard Process & Sewing Allowance of Labels

No matter what kind of label printing solutions, you will need to consider which type of fold is best for your position and products. It could be the front of the clothing, on the sleeves, neck, hem, seam, back of the jeans or trousers, inside backpacks, on the back of the jacket, or edge of the scarves.


Centre Fold (CL)

  1. Refinement
  2. Folding Column minimum 8mm or 10mm
  3. Centre folding column minimum 2mm
  4. Upper part folding column standard 10mm
  5. Label Width: 10-55mm
  6. Label Length: 22-160mm
  7. Finish to size After Fold: 11-80mm

Cut End Fold (CF)

  1. Refinement
  2. Folding Head and Tail standard 5mm (minimum 3mm)
  3. Head and Tail standard 12.5mm
  4. Folding Column 7.5mm
  5. Label Width: 10-75mm
  6. Label Length: 25-150mm

Mitre Fold (MF)

  1. Refinement
  2. Folding Column minimum 8mm or 10mm
  3. After Fold Triangle 90 degree
  4. Label Width: 10-30mm
  5. Label Length: 45-150mm

Fuse Cut (SC)

  1. After Cut Head and Tail minimum 2mm or 3mm
  2. Label Width: 10-55mm
  3. Label Length: 20-800mm
    *Also can be done with multi-line complete cut.

Roll Form (RL)

  1. No refinement
  2. Folding Head and Tail standard 3mm or 5mm
  3. Head and Tail standard 10mm


ABOUT US

CONTACT INFO

  • Office : +607-863 0369
  • Fax: +607-863 9369
  • Email: admin@mhlabels.com
  • Address: 18, Jalan Palma Raja 2, Taman Dato Chellam, 81800 Ulu Tiram, Johor, Malaysia.